|
|
|
|
Replaced The Tail Seal and Yoke, As Started to remove both Intake and Exhaust Manifolds
Manifolds removed and engine cleaned for new exhaust manifold
New Stainless steel manifold with new design
Removing the stock suspension
Installing the New suspension that is a 4 inch lift
Front will have a extra 1" of lift to offset the extra weight on the front bumper
Installed the extra hardware for the track bar, Also you can see the new spring compared with the stock one
Removed the rear spring and installed the new one the a extra bump stop on the top of the axle
Also added the 4 inch drop down for the rear track bar
Front Brakes and Rotors are new, But the rear will be completely replaced along with new drums
|
|
|
Send mail to
Jeff@rietzusa.com with
questions or comments about this web site.
|
